UTC RAVE Alert

Engineering and Computer Science Publications

Chemical Engineering

  1. Alexander Saputa, M.S., Frank Jones, Ph.D., P.E., Neslihan Alp, Ph.D., P.E., and Tricia Thomas, Ph.D., “From Well to Wheel: A Comprehensive Comparison of Traditional and Hybrid Electric Vehicles,” 32nd American Society for Engineering Management (ASEM) International Conference Proceedings, Lubbock, TX, October 19 -22, 2011.
  2. Frank Jones, Rob Bailey, and Jim Hiestand, “ The Effects of Engineering Design on Heterogeneous Biocatalysis in Microchannels.” Submitted to Applied Biochemistry and Biotechnology (2006).
  3. Jie Wen, Bill Elmore, and Frank Jones, “Enzyme Immobilization using Layer-by-Layer Self-Assembly in PDMS Biomicroreactors.” Submitted to Biotechnology and Bioengineering (2006).
  4. Neslihan Alp, Frank Jones, Rob Bailey, and Jim Hiestand, “The Use of Taguchi Statistical Methods to Optimize the Design of Biomicroreactors.” Submitted to Institute of Industrial Engineers Annual Conference, Orlando, FL, May 2006.
  5. Rob Bailey, Frank Jones, Ben Fisher, and Bill Elmore, “Immobilized Enzymatic Microbioreactor Design Enhancement using Computational Simulation.” Applied Biochemistry and Biotechnology, Vols. 121-124, 639-652 (2005).

Computer Science and Engineering

  1. Claire L. McCullough, J. Bryson, R. Pap, J. Wilson, and J. Davis, "Biologically Inspired Classification of Low Frequency Active Sonar Sensor Features for the Surveillance Towed Array Sonar System," presented at the Joint Undersea Warfare Technology Conference, Naval Postgraduate School, Monterey CA, March 2003.
  2. Claire L. McCullough, "Engineering the World: An Assignment to Measure the Elusive ABET f, h, and j," to be presented at the American Society of Engineering Education Southeastern Section Conference, Macon, GA, April 2003.
  3. Claire L. McCullough, "Attracting Under-Represented Groups to Engineering and Computer Science," presented at the American Society of Engineering Education Southeastern Section Conference, Gainesville, FL, April 2002.
  4. Claire L. McCullough, Robert Pap, Richard Akita, and Jerry Wilson, "Biologically Inspired Fusion of Sonar Sensor Data," presented at the Military Sensing Symposia National Symposium on Sensor and Data Fusion, San Diego, CA, June 2001.

Civil Engineering

    1. Edwin P. Foster and Steve Meyer, “Encouraging Professionals to Teach University Level Classes," ASEE Southeast Section Annual Meeting, Chattanooga, TN, April 3-5, 2005.
    2. Edwin P. Foster, "Having Fun with Concrete Structural Design Utilizing TK Solver Software,” ASEE Southeast Section Annual Meeting, Chattanooga, TN, April 3-5, 2005.

Electrical Engineering

  1. A. R. Ofoli “Experimental Demonstration of ammonia storage and slip modeling with control for an SCR aftertreatment system,” IEEE Industry Applications Conference Record, Orlando, FL, Oct. 9-13, 2011.
  2. A. Rubaai, A. R. Ofoli, “Teaching Power Electronics Converter Experiments That Integrates Fuzzy Logic Approach,” Proceedings of the 2011 ASEE Annual Conference and Exposition, Vancouver, BC, Canada, June 26-29, 2011.
  3. A. Khaled, A. R. Ofoli and M. Castro, “An Incremental Sliding Mode Controller (ISMC) for Chattering Reduction,” IEEE Industry Applications Conference Record, Orlando, FL, Oct. 9-13, 2011.
  4. Michel E. Holder, "Thevenin's Theorem and a Black Box," IEEE Transactions on Education in 2009, Volume 52, Number 4, page 573.
  5. A. Rubaai, M. J. Castro-Sitiriche, and A. R. Ofoli, “DSP-Based Laboratory Implementation of Hybrid Fuzzy-PID Controller Using Genetic Optimization for High-Performance Motor Drives”. IEEE Transaction on Industry Applications, vol. 44, Issue 6, pp. 1977-1986, Nov.-Dec. 2008.
  6. A. Rubaai, M. J. Castro-Sitiriche, and A. R. Ofoli, “Design and Implementation of Parallel Fuzzy PID Controller for High-Performance Brushless Motor Drives: An Integrated Environment for Rapid Control Prototyping”. IEEE Transaction on Industry Applications, vol. 44, Issue 4, pp. 1090-1098, Jul.-Aug. 2008.
  7. A. Rubaai, A. R. Ofoli, and D. Cobbinah, “DSP-Based Real-Time Implementation of a Hybrid H ∞ Adaptive Fuzzy Tracking Controller for Servo-Motor Drives”. IEEE Transaction on Industry Applications, vol. 43, Issue 2, pp. 476-484, March-April 2007.
  8. A. R. Ofoli and A. Rubaai, “Real-Time Implementation of a Fuzzy Logic Controller for Switch-Mode Power-Stage DC–DC Converters”. IEEE Transaction on Industry Applications, vol. 42, Issue 6, pp. 1367-1374, Nov.-Dec. 2006.
  9. Ahmed H. Eltom and Rusapat Harnchotipun , “Microprocessor-Based digital Relay Laboratory,” Extended Abstract Presented at the ASEE South East Meeting, April 2002.(refereed).
  10. Phil Soo Yum, Fisher Campbell, and Ahmed Eltom, “ The Diagnostic Analysis of Partial Discharge With Acoustic Monitoring in GIS Equipment.” Presented at the IEEE Power Engineering Society Summer Meeting, July 2002 (Refereed).
  11. Ahmed H. Eltom and Rusapat Harnchotipun, “Microprocessor-Based digital Relay Laboratory  with Industry Support,” Presented at the IEEE Power Engineering Society Summer Meeting, July 2002.(Refereed) 

Engineering: Industrial

  1. Tew WM, T. Baylis, B. Ervin, T. Currey, C. Wigal, and J. Rudd, “Tibial Tubercle Osteotomy and Lateral Release Effects on Patellofemoral Mechanics,” Oral presentation at the Mid-America Orthopaedic Association Annual Meeting, San Antonio TX, April 19 – 23, 2006.
  2. Cecelia M. Wigal, “Project-Based Learning in Engineering Design and Graphical Communication,” Proceedings of the Southeastern Section Of the American Society for Engineering Education Annual Meeting, Apr. 2 - 4, 2006.
  3. Cecelia M. Wigal, “ Managing and Aligning Assessment Knowledge,” Proceedings of the Frontiers in Education Conference, Oct. 19 - 22, 2005.
  4. Cecelia M. Wigal, “Introducing Systems Modeling at the Freshman Level, “ The Proceedings of The American Society for Engineering Education Annual Conference, June 12 - 15, 2005.

Engineering Management and Technology

  1. Neslihan Alp, Ph.D., P.E. and Cody Arnold, M.S., “The need for ergonomic awareness within the workplace,” 32nd American Society for Engineering Management (ASEM) International Conference Proceedings, Virginia Beach, VA, October 17 -20, 2012.
  2. Ron Cox, Ph.D., P.E., “Changing face of manufacturing in the US,” 32nd American Society for Engineering Management (ASEM) International Conference Proceedings, Virginia Beach, VA, October 17 -20, 2012.
  3. Ron Cox, Ph.D., P.E., “Oil and gas from shale-a US energy asset?,” 32nd American Society for Engineering Management (ASEM) International Conference Proceedings, Virginia Beach, VA, October 17 -20, 2012.
  4. Ed McMahon, Ph.D., P.E., “Enhancing participation in hybrid online/in-class project courses,” 32nd American Society for Engineering Management (ASEM) International Conference Presentation, Virginia Beach, VA, October 17 -20, 2012.
  5. Rebecca Crowe, M.S. and Aldo McLean, Ph.D., “Approach to performance assessment of a cost plus award fee contract,” 32nd American Society for Engineering Management (ASEM) International Conference Presentation, Virginia Beach, VA, October 17 -20, 2012.
  6. Neslihan Alp, Ph.D., P.E. and Banning Stack, M.S., “Scope Management and Change Control Process Study for Project-based Companies in the Construction and Engineering Industries,” Portland International Center for Management of Engineering and Technology (PICMET) 2012 International Conference Proceedings, Vancouver, Canada, July 29-August 2, 2012.
  7. Ron Cox, Ph.D., P.E., “National Competitiveness,” 32nd American Society for Engineering Management (ASEM) International Conference Proceedings, Lubbock, TX, October 19 -22, 2011.
  8. Ron Cox, Ph.D., P.E., “Coal: A U.S. Energy Asset,” 32nd American Society for Engineering Management (ASEM) International Conference Proceedings, Lubbock, TX, October 19 -22, 2011.
  9. Ed McMahon, Ph.D., P.E., “Encouraging Entrepreneurship in Education at the graduate and Undergraduate Level,” 32nd American Society for Engineering Management (ASEM) International Conference Proceedings, Lubbock, TX, October 19 -22, 2011.
  10. Alexander Gomez, M.S. and Aldo McLean, Ph.D., “Process and Documentation in MAXXPRO MRV Production,” 32nd American Society for Engineering Management (ASEM) International Conference Proceedings, Lubbock, TX, October 19 -22, 2011.
  11. Alexander Saputa, M.S., Frank Jones, Ph.D., P.E., Neslihan Alp, Ph.D., P.E., and Tricia Thomas, Ph.D., “From Well to Wheel: A Comprehensive Comparison of Traditional and Hybrid Electric Vehicles,” 32nd American Society for Engineering Management (ASEM) International Conference Proceedings, Lubbock, TX, October 19 -22, 2011.
  12. Neslihan Alp, Ph.D., P.E. and Roy Mathai, M.S., “Smart Grid: A New Approach to Advanced Power Grid and Energy Savings,” 31st American Society for Engineering Management (ASEM) International Conference Proceedings, Rogers, AR, October 13 -16, 2010.
  13. Neslihan Alp, Ph.D., P.E. and Desmond Raymond, M.S., “Application of Engineering Management Principles to Human Factors Aspect of Nuclear Control Room Design,” 31st American Society for Engineering Management (ASEM) International Conference, Rogers, AR, October 13- 16, 2010.
  14. Neslihan Alp, Ph.D., P.E., "Changes in the Education and Learning Environment," 10th International Conference on Knowledge, Culture, and Change in Organizations, Montreal, Canada, July 26-29, 2010.
  15. Jan Evans, MBA, ABD, "Benefits of Short Interval Scheduling in the Construction Industry," International IIE 2010 Annual Conference, Cancun, Mexico, June 5-9, 2010.
  16. Jan Evans, MBA, ABD, "Work Design for the Temporary Work Force in a Soft Economy," International IIE 2010 Annual Conference, Cancun, Mexico, June 5-9, 2010.
  17. Jan Evans, MBA, ABD, "Quantitative Models for Capital Rationing in a Soft Economy," International IIE 2010 Annual Conference, Cancun, Mexico, June 5-9, 2010.
  18. Jan Evans, MBA, ABD, "Ergonomically Driven Work Standards in a Lean Environment," Annual Applied Ergonomics Conference, San Antonio, TX, March 22-25, 2010.
  19. Jan Evans, MBA, ABD, "Integration of Ergonomics into Total Productive Maintenance," Annual Applied Ergonomics Conference, San Antonio, TX, March 22-25, 2010.
  20. Neslihan Alp, Ph.D., P.E. and Tim McGhe e, M.S., “Meting the Needs of the Construction Industry,” 30th American Society for Engineering Management (ASEM) International Conference Proceedings, Springfield, MO, October 14 -17, 2009.
  21. Neslihan Alp, Ph.D., P.E. and Guy Bony, M.S., “ Improving Teller Referral System,” 30th American Society for Engineering Management (ASEM) International Conference Proceedings, Springfield, MO, October 14 -17, 2009.
  22. James V. Ware, Jr., P.E., Neslihan Alp, Ph.D., P.E., Ronald B. Cox, M.B.A., Ph.D., P.E., Gary H. McDonald, Ph.D., P.E., and Robert N. Dreyer, M.S.E.E, “A Continuous Improvement Plan for the Engineering Technology Program in a Community College," 28th American Society for Engineering Management (ASEM) International Conference Proceedings, Chattanooga, TN, November 7-10, 2007.
  23. Neslihan Alp, Ph.D., P.E., Frank Jones, Ph.D., P.E., James Hiestand, Ph.D., P.E., and Robert Bailey, Ph.D., P.E., “Conversion Rate Optimization in Biomicroreactors Using the Taguchi Method," published abstract at the Institute of Industrial Engineers (IIE) Annual Conference, May 2007, Nashville, TN.
  24. Neslihan Alp, Ph.D., P.E., Ronald Bailey, Ph.D., P.E., and David Pittenger, Ph.D., “A Regression Model to Predict the Graduation Rate,” presented at the ASEE-SE National Conference, April 2007, Louisville, KY.
  25. Neslihan Alp, Ph.D., P.E., “Systems Improvements in Healthcare,” published and presented at the American Society of Engineering Management (ASEM) Conference, October 2006, Huntsville, AL.
  26. Roger Jones, M.D. and Neslihan Alp, Ph.D., P.E., ”Collaborative Research in Patient Safety,” Panelists at UT Nuts and Bolts Clinical Research Symposium, September 29, 2006, Chattanooga, TN.
  27. Neslihan Alp, Ph.D., P.E., Frank Jones, Ph.D., P.E., James Hiestand, Ph.D., P.E., and Robert Bailey, Ph.D., P.E,,“Use of Taguchi Methods to Optimize the Design of Biomicroreactors,” published and presented at the Institute of Industrial Engineers (IIE) Annual 2006 Conference Proceedings, Orlando, FL, May 20-24, 2006.
  28. Roger Jones, M.D., Mukta Panda, M.D., and Neslihan Alp, Ph.D., P.E., ” RAISING Standards for Patient Safety: Residents Actively Identifying Systems Improvements to achieve National Goals ,” published and presented at the SGIM 28th Annual Meeting, April 26-29, 2006, in Los Angeles, California.
  29. Neslihan Alp, Ph.D., P.E., Ed McMahon, Ph.D., P.E., Cecelia Wigal, Ph.D., P.E., Norman Desbiens, M.D., Roger Jones, M.D., Mukta Panda, M.D., Asma Khan, M.D., and Sonya Reid, “Residents Actively Identifying System Improvements for Patient Safety,” published and presented at the Institute of Industrial Engineers (IIE), Society of Health Systems (SHS) 2006 Conference Proceedings, San Diego, CA, February 10-12, 2006.

Graduate School of Computational Engineering

  1. Ahrabi, B.R., Sreenivas. K., and Webster, R.S., "Computational Investigation of Compressible Flow in a Diffusing S-duct," 49th AIAA/ASME/SAE/ASEE Joint Propulsion Conference. San Jose, CA, July 2013, AIAA Paper 2013-3601.
  2. Flynt, G.A., Webster, R.S., and Sreenivas. K., "Computation of Heat Transfer In Turbine Rotor Blade Cooling Channels with Angled Rib Turbulators," 49th AIAA/ASME/SAE/ASEE Joint Propulsion Conference. San Jose, CA, July 2013, AIAA Paper 2013-3621.
  3. Lin, W., Sreenivas, K., Webster, R.S., and Hyams, D.G., "Effect of Casing Groove Locations on the Performance of an Axial Flow Stage,"  49th AIAA/ASME/SAE/ASEE Joint Propulsion Conference. San Jose, CA, July 2013, AIAA Paper 2013-3632.
  4. Sreenivas, K, Hilbert, C.B., Mittal, A., Hereth, L., and Taylor, L.K., "High-Fidelity Computational Simulation of the Wake Characteristics of a Model Wind Turbine," 31st AIAA Applied Aerodynamics Conference, San Diego, CA, June 2013, AIAA Paper 2013-2416.
  5. Taylor, L.K., Sreenivas, K.,  Webster, R.S., and Kress, J., "An Artificial Compressibility Algorithm for Convective Heat Transfer," 44th AIAA Thermophysics Conference. June 2013, San Diego, CA, AIAA Paper 2013-2894.
  6. Glasby, R., Burgess, N., Anderson, W.K., Wang, L., Allmaras, S. and Mavriplis, D., "Comparison of SU/PG and DG Finite-Element Techniques for the Compressible Naiver-Stokes Equations on Anisotropic Unstructured Meshes," AIAA paper 2013-0691, 51st AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, Dallas, TX, 07-10 January, 2013.
  7. O'Connell, M. and Karman Jr., S. L., "Mesh Rupturing: A Technique for Geometry Insertion and Significant Mesh Movement," AIAA Paper 2013-1048, 51st AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, Dallas, TX, 07-10 January, 2013.
  8. Wang, L., Anderson, W.K, Erwin, T., and Kapadia, S., "High-order Methods for Solutions of Three-dimensional Turbulent Flows," AIAA Paper 2013-0856, 51st AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, Dallas, TX, 07-10 January, 2013.
  9. Mittal, A., and Taylor, L.K., “Optimization of Large Wind Farms Using a Genetic Algorithm,” Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition, Houston, TX, November 9-15, 2012.
  10. Webster, R., Whitfield, D., Hilbert, B., Sreenivas, K., Hyams, D. and Briley, W., "Demonstration of Sub-system Level Simulations: A Coupled Inlet and Turbofan Stage," AIAA Paper 2012-4282, 48th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Atlanta, GA, 2012.
  11. Masters, J. S, Karman, S. L. Jr., “Manipulating Boundaries and Viscous Regions of Unstructured Meshes Using Winslow’s Equations”, AIAA Journal, Volume 50, Number 10, pp. 2080-2090, October 2012.
  12. Wang, Li and Anderson, W. Kyle, “Shape Sensitivity Analysis for the Compressible Navier-Stokes Equations Via Discontinuous Galerkin Methods”, Computers & Fluids, Vol. 69, pp. 93-107, 2012.
  13. Ghasemi, A., Sreenivas, K., and Taylor, L.K., "Unconditionally stable high-order picard iteration algorithm for computational electromagnetics," IEEE Antennas and Propagation Society International Symposium (APSURSI), 8 - 14 July 2012 , Chicago, IL.
  14. Wang, Li, Anderson, W. Kyle, Erwin, Taylor, and Kapadia, Sagar, “Solutions of High-order Methods for Three-dimensional Compressible Viscous Flows”, AIAA Paper 2012-2836, the 42nd AIAA Fluid Dynamics Conference, New Orleans, LA, June 2012.
  15. Druyor Jr., C., Karman, S. "An Adaptive Hybrid Grid Generation Method for Complex Geometries", AIAA-2012-157, 50th AIAA Aerospace Sciences Meeting, Nashville, TN, January 2012.
  16. O'Connell, M., Karman, S. "Techniques for Unstructured Mesh Adaptation with Elliptic Smoothing", AIAA-2012-156, 50th AIAA Aerospace Sciences Meeting, Nashville, TN, January 2012.
  17. Lin, W., Sreenivas, K., Webster, R., Hyams, D.G., "Effect of Casing and Tip Modifications on the Performance of an Axial Flow Stage," AIAA Paper 2012-0475, 50th AIAA Aerospace Sciences Meeting, 9 - 12 January 2012, Nashville, TN.
  18. Brock, W., Burdyshaw, C., Karman, S., Betro, V., Hilbert, B., Anderson, K., Haimes, R., "Adjoint-Based Design Optimization Using CAD Parameterization Through CAPRI", AIAA-2012-968, 50th AIAA Aerospace Sciences Meeting, Nashville, TN, January 2012.
  19. Mittal, A., Taylor, L.K., Sreenivas, K., and Arabshahi, A., “Investigation of Two Analytical Wake Models Using Data From Wind Farms,” Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition, Denver, Co., November 11-17, 2011.
  20. Ghasemi, A., and Sreenivas, K., “On the Theory of a Novel High-Order Time-Marching Algorithm Based on Picard Iteration,” UTC-CECS-SimCenter-2011-02, September 2011.
  21. Anderson, W. Kyle, Wang, Li, Kapadia, Sagar, Tanis, Craig, and Hilbert, Bruce, “Petrov-Galerkin and discontinuous Galerkin methods for time-domain and frequency-domain electromagnetic simulations,” J. of Comp. Physics, Vol. 230, pp. 8360-8385, 2011. DOI: 10.1016/j.jcp.2011.06.025, Available online Sept. 15, 2011.
  22. Arabshahi, A., Taylor, L.K., and Whitfield, D.L. “Computation of Dynamic Stability and Control Derivatives,” AIAA-2011-3348, 29th AIAA Applied Aerodynamic Conference, Honolulu, Hawaii, June 27-30, 2011.
  23. Wang, L. and Anderson, W.K., “Adjoint-Based Shape Optimization for Electromagnetic Problems Using Discontinuous Galerkin Method,” AIAA Journal, Vol. 49, No. 6, pp 1302-1305, 2011.
  24. Wang, L. and Anderson, W.K., “Sensitivity Analysis for the Compressible Navier-Stokes Equations Using A Discontinuous Galerkin Method,” AIAA-2011-3408, 41st AIAA Fluid Dynamics Conference, June, 2011, Honolulu, Hawaii.  
  25. Hyams, D., Sreenivas, K., Webster, R., Currier, N., “A Generalized, Unstructured Interpolative Interface method for Rotor-Stator Interactions,” AIAA-2011-3700, 20th AIAA Computational Fluid Dynamics Conference, Honolulu, Hawaii, June 27-30, 2011.
  26. Erwin, J. Taylor, Anderson, W. Kyle, Wang, Li, and Kapadia, Sagar, “Three Dimensional Stabilized Finite Elements for Compressible Navier-Stokes,” 41st AIAA Fluid Dynamics Conference, June, 2011, Honolulu, Hawaii.
  27. Nichols, III, D. S., “Accounting for Shocks in Turbulence Modeling,” 41st AIAA Fluid Dynamics Conference, June, 2011, Honolulu, Hawaii.
  28. Epstein, J.M., Pankajakshan, R., Hammond, R.A., “Combining Computational Fluid Dynamics and Agent-Based Modeling: A New Approach to Evacuation Planning,” PLoS ONE: Research Article, published 31 May 2011 10.1371/journal.pone.0020139.
  29. Ji, L., “Unstructured Grid Technologies for Hydrodynamic Applications with Bodies in Relative Motion and Mesh Deformation,” PhD Dissertation, University of Tennessee at Chattanooga, April 2011.
  30. Briley, W. R. and McDonald, H., “Reflections on the Evolution of Implicit Navier–Stokes Algorithms,” Computers & Fluids, 41:15-19, 2011.
  31. Pankajakshan, R., Mitchell, B.J., and Taylor, L.K., “Simulation of unsteady two-phase flows using a parallel Eulerian-Lagrangian approach,” Computers & Fluids, Volume 41, Issue 1, February 2011, Pages 20-26.
  32. Hyams, D.G., Sreenivas, K., Pankajakshan, R., Nichols, III, D.S., Briley, W.R., and Whitfield, D.L., “Computational simulation of model and full scale Class 8 trucks with drag reduction devices,” Computers & Fluids, Volume 41, Issue 1, February 2011, Pages 27-40.
  33. Karman, Jr., S.L., “Virtual Control Volumes for Three-Dimensional Unstructured Elliptic Smoothing,” AIAA-2011-893, 49th AIAA Aerospace Science Meeting, Orlando FL, January 2011.
  34. Betro, V. and Karman, Jr., S.L., “Fully Anisotropic Split-Tree Adaptive Refinement Mesh Generation Using Tetrahedral Mesh Stitching,” Proceedings of the 49th Annual AIAA Aerospace Sciences Meeting, Orlando, FL, January 4-7, 2011. AIAA-2011-0895.
  35. Kapadia, S., Anderson, W.K., and Burdyshaw, C., “Channel shape optimization of solid oxide fuel cells using advanced numerical techniques,” Computers & Fluids, Vol.  41, 2011, 41-50.
  36. Masters, J. S., “Winslow Elliptic Smoothing Equations Extended to Apply to General Regions of an Unstructured Mesh,” PhD Dissertation, University of Tennessee at Chattanooga, December 2010.
  37. Wang, L., Mavriplis, D.J., and Anderson, W.K., “Adjoint Sensitivity Formulation for Discontinuous Galerkin Discretizations in Unsteady Inviscid Flow Problems,” AIAA Journal, Vol. 48 (12), 2010.
  38. Betro, V., “Implementing a Node-Based Split-Tree Neighbor Search Algorithm,” Research Note, 19th Annual International Meshing Roundtable, Chattanooga, TN, October 6-8, 2010.
  39. Karman, S.L. Jr., “Virtual Control Volumes for Two-Dimensional Unstructured Elliptic Smoothing,” 19th International Meshing Roundtable, paper 2A.4, Chattanooga, TN, October, 2010.
  40. Hyams, Daniel G., Kress, Reid, and Swafford, Tim W., “CFD‐Driven Agent‐Based Dispersion Modeling of the Y‐12 National Security Complex,” UTC-CECS-SimCenter-2010-01-R, September 2010.
  41. Ji, L., Sreenivas, K., Hyams, D., and Wilson, R., “A Parallel Universal Mesh Deformation Scheme for Hydrodynamic Applications,” Proceedings of the 28th ONR Symposium on Naval Hydrodynamics, Pasadena, CA, 12-17 Sep. 2010.
  42. Betro, V. C., “Fully Anisotropic Split-Tree Adaptive Refinement Mesh Generation Using Tetrahedral Mesh Stitching,” PhD Dissertation, University of Tennessee at Chattanooga, August 2010.
  43. Hyams, D. G., Webster, R. W., and Sreenivas, K., “A Generalized Interpolative Interface for Parallel Unstructured Flow Solvers,” 40th Fluid Dynamics Conference and Exhibit, Chicago, Illinois, June 28-1, 2010. Paper No. 2010-5097.
  44. Hyams, D. G., Webster, R. W., and Sreenivas, K., “A Generalized Axisymmetric Boundary Condition Method for Parallel Unstructured Field Solvers,” Proceedings of ASME Gas Turbine Technical Congress and Exposition 2010, Glasgow, UK, June 14-18, 2010. Paper GT2010-23414.
  45. Ji, L., Wilson, R., Sreenivas, K., and Hyams, D., “A Parallel Universal Mesh Deformation Scheme,” 28th AIAA Applied Aerodynamics Conference, June 2010, Chicago, AIAA-2010-4938.
  46. Kapadia S., Anderson W.K., and Workman N., “Computational Design of Tubular Solid Oxide Fuel Cells,” ASME 2010 8th International Fuel Cell Science, Engineering & Technology Conference, June 14-16, 2010, Brooklyn, New York.
  47. Wang, Li, Mavriplis, Dimitri J. and Anderson, W. Kyle, “Unsteady Discrete Adjoint Formulation for High-order Discontinuous Galerkin Discretizations in Time-dependent Flow Problems,” 48th AIAA Aerospace Science Meeting, January 2010, Orlando, FL, AIAA-2010-367.
  48. Johnson, B. C., Webster, R. S., and Sreenivas K. “A Numerical Investigation of S-Duct Flows with Boundary-Layer Ingestion,” 48th AIAA Aerospace Science Meeting, January 4th-January 7th, 2010, Orlando, Florida, AIAA-2010-841.
  49. Webster, R., Hyams, D., Sreenivas, K., “Unstructured Grid Technology Applied to Axial-flow Compressors,” AIAA-2010-1605, 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, Orlando, Florida, Jan. 4-7, 2010. 

Mechanical Engineering

  1. Charles V. Knight and Gary H. McDonald, "Attributes of a Modern Mechanical Engineering Laboratory," for the ASEE Instrumentation Division, Proceedings of the 2005 Annual Meeting of the American Society of Engineering Education, Portland, Oregon, June 2005.
  2. Charles V. Knight and Gary H. McDonald, " Is the Effort Worthwhile?", ASEE Proceedings of the 2005 Southeastern Section Meeting, Chattanooga, TN, April, 2005.

College of Engineering and Computer Science

College of Engineering and Computer Science