Connect Your Windows Computer to the UTC VPN

Special Note

To use the VPN client, you must first Request VPN Access.

Directions

  1. While on campus, open your preferred web browser to: https://www.netops.utc.edu/vpn
  2. Under the ‘Username’ field, enter your UTC ID (ex. abc123)
  3. Under the ‘Password’ field, enter your UTC password
  4. Select ‘Login’
  5. Navigate to the VPN Profile section
    • Download the VPN Profile listed as ‘full tunnel’
    • Download the VPN Profile listed as ‘split tunnel’
  6. Navigate to the VPN Software section
    • Download the VPN client listed as ‘Windows 32/64 bit’
  7. Once the download has completed, install the client
  8. Select 'Standard Installation' when asked
  9. Open the VPN client
  10. Select ‘File’
  11. Select ‘Import’
  12. Under the ‘File Type’ dropdown, select ‘Cisco PCF File (*.pcf)’
  13. Select the VPN Profile listed as ‘vpn-split’
  14. Click ‘Open’
  15. Select ‘File’
  16. Select ‘Import’
  17. Under the ‘File Type’ dropdown, select ‘Cisco PCF File (*.pcf)’
  18. Select the VPN Profile listed as ‘vpn-full’
  19. Click ‘Open’
  20. While off campus, double click on the newly added entry
  21. Enter the VPN credentials provided by Network Services