Section Menu

 

 

Certificate Programs in Engineering Management

Graduate students can choose from below graduate certificates in Engineering Management.  Each graduate certificate has four courses to be chosen as follows.  Graduate students who are pursuing a master's degree can also pursue a graduate certificate by taking an additional 6 graduate hours.

 

Certificate Program in Fundamentals of Engineering Management

The Fundamentals of Engineering Management graduate certificate program emphasizes and provides technical knowledge of basic engineering management concepts, advanced engineering economy, project management, and quality systems management. It includes project-scheduling tools such as PERT/CPM with Microsoft Project, engineering economic evaluation, understanding and use of quality systems, and fundamentals of management in a technical organization. The certificate provides fundamental concepts and core technical knowledge that could benefit all practicing engineers. The Fundamentals of Engineering Management graduate certificate program will be offered using flexible and nontraditional delivery systems via the Internet. The certificate can also be obtained through the traditional on-campus classes.

Admission Requirements

Knowledge of engineering economy is required as demonstrated by the satisfactory completion of ENGR 3520, Engineering Economy, or equivalent. Individuals will be admitted to the Certificate in Fundamentals of Engineering Management program if, either:

a. They have a bachelor's degree and significant related professional experience and are approved by the Engineering Management Graduate Committee,

or

b. They meet the admission requirements of the Graduate School as stated in the Graduate Catalog, are admitted to the Engineering or Engineering Management M.S. program, and have satisfied all prerequisite courses assigned by the respective Graduate Committee.

Course Requirements *

ENGM 5580

Advanced Engineering Economy (3hrs.)

ENGM 5830

Strategic Management and Technology (3hrs.)

ENGM 5850

Technical Innovation (3hrs.)

ENGM 5870

Supply Chain Management (3hrs.)

 

*With approval of the graduate program coordinator, students may take a 500-level course in the similar area of interest to substitute one of the courses in the certificate program if the course is not offered during the period of study.

 

 

Certificate Program in Project and Technology Management

The Project and Value Management Certificate Program emphasizes and provides technical knowledge of project management, value management, and planning tools along with engineering economy, engineering cost accounting, and systems analysis. It includes project-scheduling tools such as PERT/CPM with Microsoft Project, project control, analysis of functional activities, engineering economic evaluation, and project evaluation. It supplements the technical knowledge with issues related to effective leadership and/or accounting systems for cost analysis.

Admission Requirements

Knowledge of engineering economy is required as demonstrated by the satisfactory completion of ENGR 3520, Engineering Economy, or equivalent. Individuals will be admitted to the Certificate in Project and Value Management program if, either:

a. They have a bachelor's degree and significant related professional experience such as project management, cost accounting, and economic evaluation of projects and are approved by the Engineering Management Graduate Committee,

or

b. They meet the admission requirements of the Graduate School as stated in the Graduate Catalog, are admitted to the Engineering or Engineering Management M.S. program, and have satisfied all prerequisite courses assigned by the respective Graduate Committee.

Course Requirements *

ENGM 5540

Technical Project Management (3hrs.)

ENGM 5580

Advanced Engineering Economy (3hrs.)

ENGM 5850

Technical Innovation (3hrs.)

ENGM 5870

Supply Chain Management (3hrs.)

 

*With approval of the graduate program coordinator, students may take a 500-level course in the similar area of interest to substitute one of the courses in the certificate program if the course is not offered during the period of study.

 

 

Certificate Program in Quality Management

The Quality Management Certificate Program emphasizes and provides technical knowledge of advanced statistical methods, design of experiments, quality control, reliability, maintainability, and availability. It includes quality control tools with SPC Expert and SQC, quality functional deployment (QFD), and total quality management (TQM). It extends and supplements the technical knowledge of professionals working in the quality and reliability area as well as such programs as Six Sigma.

Admission Requirements

Knowledge of statistics is required as demonstrated by the satisfactory completion of ENGR 2220, Probability of Statistics for Engineers, or equivalent. Individuals will be admitted to the Certificate in Quality Management program if, either:

a. They have a bachelor's degree and significant related professional experience in the quality and reliability areas and are approved by the Engineering Management Graduate Committee,

or

b. They meet the admission requirements of the Graduate School as stated in the Graduate Catalog, are admitted to the Engineering or Engineering Management M.S. program, and have satisfied all prerequisite courses assigned by the respective Graduate Committee.

Course Requirements *

ENGM 5580

Advanced Engineering Economy (3hrs.)

ENGM 5830

Strategic Management and Technology (3hrs.)

 

Choose two Quality-related courses from the below list:

ENGM 5520

Reliability Engineering (3hrs.)

ENGM 5560

Quality Management Systems (3hrs.)

ENGM 5570

Advanced Quality Control (3hrs.)

 

*With approval of the graduate program coordinator, students may take a 5000-level course in the similar area of interest to substitute one of the courses in the certificate program if the course is not offered during the period of study.

 

 

Certificate Program in Leadership and Ethics

Admission Requirements

Individuals will be admitted to the Certificate in Leadership and Ethics program if, either:

a. They have a bachelor's degree and significant related professional experience and are approved by the Engineering Management Graduate Committee,

or

b. They meet the admission requirements of the Graduate School as stated in the Graduate Catalog, are admitted to the Engineering or Engineering Management M.S. program, and have satisfied all prerequisite courses assigned by the respective Graduate Committee.

Course Requirements*

ENGM 5500

Concepts in Engineering Management (3hrs.)

ENGM 5510

Legal and Ethical Aspects of Engineering (3hrs.)

ENGM 5550

Technical Entrepreneurship and Leadership (3hrs.)

ENGM 5850

Technical Innovation (3hrs.)

 

*With approval of the graduate program coordinator, students may take a 5000-level course in the similar area of interest to substitute one of the courses in the certificate program if the course is not offered during the period of study.

 

 

Certificate Program in Power Systems Management

Admission Requirements

Individuals will be admitted to the Certificate in Power Systems Management program if, either:

a. They have a bachelor's degree and significant related professional experience and are approved by the Engineering Management Graduate Committee,

or

b. They meet the admission requirements of the Graduate School as stated in the Graduate Catalog, are admitted to the Engineering or Engineering Management M.S. program, and have satisfied all prerequisite courses assigned by the respective Graduate Committee.

Course Requirements*

ENGM 5540

Technical Project Management (3hrs.)

ENGM 5580

Advanced Engineering Economy (3hrs.)

ENEE 5520

Power System Operations (3hrs.)

ENEE 5620

Power System Protection (3hrs.)

 

*With approval of the graduate program coordinator, students may take a 5000-level course in the similar area of interest to substitute one of the courses in the certificate program if the course is not offered during the period of study.

 

 

Certificate Program in Logistics and Supply Chain Management

Admission Requirements

Individuals will be admitted to the Certificate in Logistics and Supply Chain Management program if, either:

a. They have a bachelor's degree and significant related professional experience and are approved by the Engineering Management Graduate Committee,

or

b. They meet the admission requirements of the Graduate School as stated in the Graduate Catalog, are admitted to the Engineering or Engineering Management M.S. program, and have satisfied all prerequisite courses assigned by the respective Graduate Committee.

Course Requirements*

ENGM 5580

Advanced Engineering Economy (3hrs.)

ENGM 5830

Strategic Management and Technology (3hrs.)

ENGM 5870

Supply Chain Management (3hrs.)

ENGM 5880

Global Logistics (3hrs.)

 

*With approval of the graduate program coordinator, students may take a 5000-level course in the similar area of interest to substitute one of the courses in the certificate program if the course is not offered during the period of study.

 

 

 

Certificate Program in Construction Management

Admission Requirements

Individuals will be admitted to the Certificate in Construction Management program if, either:

a. They have a bachelor's degree and significant related professional experience and are approved by the Engineering Management Graduate Committee,

or

b. They meet the admission requirements of the Graduate School as stated in the Graduate Catalog, are admitted to the Engineering or Engineering Management M.S. program, and have satisfied all prerequisite courses assigned by the respective Graduate Committee.

Course Requirements*

ENGM 5540

Technical Project Management (3hrs.)

ENGM 5580

Advanced Engineering Economy (3hrs.)

 

Choose two Construction-related courses from the below list:

ENGM 5600

Sustainability and LEED (3hrs.)

ENGM 5610

Construction Law: Contracts and Claims (3hrs.)

ENGM 5620

Strategic Bidding and Estimating (3hrs.)

ENGM 5630

Advanced Operations and Constructability (3hrs.)

ENGM 5640

Design and Construction of Tall Buildings (3hrs.)

ENGM 5650

Lean Construction (3hrs.)

 

*With approval of the graduate program coordinator, students may take a 5000-level course in the similar area of interest to substitute one of the courses in the certificate program if the course is not offered during the period of study.

©